|
|
 |
|
| |
| List of Laboratories : |
| |
| Sr.No. |
Laboratory Name |
Lab.
In Charge |
| 1. |
Machine Shop |
Mr. N. M. Khedkar |
| 2. |
Sheet Metal Shop |
Mr. N. M. Khedkar |
| 3. |
Plumbing Shop |
Mr. N. M. Khedkar |
| 4. |
Welding Shop |
Mr. N. M. Khedkar |
| 5. |
Smithy Shop |
Mr. N. M. Khedkar |
| 6. |
Carpentry Shop |
Mr. N. M. Khedkar |
| 7. |
Fitting Shop |
Mr. N. M. Khedkar |
|
| |
| Details of Laboratory |
| |
| Machine Shop: |
| |
| Laboratory Name: |
Machine Shop |
| Location of Laboratory: |
Sub-Building, Ground floor, Back side. |
| Area of Laboratory: |
341.31 m2 |
| Laboratory In charge: |
Mr. N. M. Khedkar |
|
|
| Laboratory Resources : |
|
| Equipments :- |
Lathe machine, Milling Machine, Sloter Machine, Shapping Machine,
Grinder(Bench), Hydrolic Hack Machine, Knurling Tool 4”,
Cross Pan Hammar, Vernier Hight, Vernier Callipar(8”),
Screw driver(15”,18”), Try square, Spaner Adjustable 250,
Tap wrench, Flat File, Allen key set(Inch & mm), Center punch(4”),
Magnetic ’V’ block, H.S.S tool (1/2”*3”, 5/8”*3”, 1/4”*1”),
Marking block, Milling side& Face cutter, Inside & Outside callipar,
Twist drill set901-13mm), Thread gauge(mm-Inches), Number punch set,
Twist drill socket(20-25), Dead center, Vernier height gauge 12”,
Spaner set(6mm-20mm), Spaner(10-11mm), Capital Punch set,
Milling bush, Plyer, Twist drill 19”, Drill chuck with (key) 13mm,
Center drill, Boaring bar 1/4”, Hack saw blade, Wheel dreser,
Oil can cuppy(1/2Liter), Revoiling center, Round file,
Milling slitting saw cutter, Tap set (5mm).
| |
|
| |
| Utilization of Laboratory
: First Year Engineering (F.E.), All Branches. |
| |
| |
| Welding Shop: |
| |
| Laboratory Name: |
Welding Shop |
| Location of Laboratory: |
Sub-Building, Ground floor, Back side. |
| Area of Laboratory: |
170.66 m2 |
| Laboratory In charge: |
Mr. N. M. Khedkar |
|
|
| Laboratory Resources : |
|
| Equipments :- |
Welding Machine, Metal Cutting Machine, Bench Grinder Machine,
Shearing Machine, Hand Grinder, Welding creen, Die Stock Set,
Nozal, Bench Drilling Machine, Pipe Vice, Plumbing Table,
Welding Booth, Wash basin, Compressor with gun, Plota spring gun,
10mt hose pipe, Plier, Snip, Flat tong-14”.
| |
|
| |
| Utilization of Laboratory : First Year Engineering (F.E.) All Branches |
| |
| |
| Carpentry Shop: |
| |
| Laboratory Name: |
Carpentry Shop |
| Location of Laboratory: |
Sub-Building, Ground floor, Back side. |
| Area of Laboratory: |
170.66 m2 |
| Laboratory In charge: |
Mr. N. M. Khedkar |
|
|
| Laboratory Resources : |
|
| Equipments :- |
‘C’ or ‘G’ Clamp-4”, Firmer Chisel-1/4,1/2,1 ”, Marking Guage-8”,
Marking Knife-7”, W/T Lathe Machine-4.5’& (Tool Kit),
Plywood Cutting Machine, Circular Saw Machine, Nylon Mallate,
Oil Stone-6”, Metal Jack Plane-12”, Pincer-6”, Rasp File-12”,
Screw driver-18”, Screw Driver set, Saw with A1. Handle-18”,
Spanner(14-15)& (12-13), Try square,-6”, Carpentry vice-7”.
| |
|
| |
| Utilization of Laboratory : First Year Engineering (F.E.) All Branches |
| |
| |
| Fitting Shop: |
| |
| Laboratory Name: |
Fitting Shop |
| Location of Laboratory: |
Sub-Building, Ground floor, Back side |
| Area of Laboratory: |
60 m2 |
| Laboratory In charge: |
Mr.N.M.Khedkar |
|
|
| Laboratory Resources : |
|
| Equipments :- |
Drilling Machine,Grinding Machine, 8 No. Of Working
tables
and 30 No. of Working Tool Set.
| |
|
| |
| Utilization of Laboratory : First Year Engineering (F.E.) All Branches |
| |
|
|
|
| |
| |
|
|
